Skip to content

Free shipping from $50 · Ships within 3 business days

Excited State

UV printing

Ink, cured in seconds by ultraviolet light.

A UV printer jets liquid ink onto almost any surface, then a UV lamp follows the print head and hardens each droplet instantly. Nothing soaks in, nothing needs to dry, and the finished print is bonded to the object with a fine raised texture you can feel with your thumb.

CAFFEINEC8H10N4O2 · OFFICIAL FUEL OF FINALS WEEKUVPRINTS.US

Why it matters

UV vs. vinyl vs. sublimation

FeatureUV print (us)Cut vinylSublimation
Works on dark surfacesYes, white under-baseYesNo, needs white/light polyester
Full-color photos & gradientsYesLimited (cut shapes)Yes
Film that can lift at the edgesNone, the ink is cured onto the surfaceYesNone
TextureSlightly raised, matte-glossFlat stickerFlat, in the coating
Hard goods (steel, acrylic, PC)YesYesOnly if pre-coated
Minimum order111

White ink layer

Dark case, clear acrylic, steel bottle: we lay down a white base first so colors stay bright instead of muddy.

Zero setup

No screens, no plates, no vinyl weeding. Each piece is its own print job, so one-offs cost the same per unit as a batch.

Ink you can feel

Cured ink sits a hair above the surface. Pick the textured finish and we stack layers of white ink under the color, so the artwork stands up to a millimeter proud and you can read it with your thumb.

Who makes this

One shop, one person, every order.

Excited State is a one-person print shop in Maryland Heights, Missouri, run by Aptaseek LLC. Nothing is printed until you order it, and every piece goes through the same hands:

  1. 01

    Print

    Your design goes onto the product you picked, on a UV printer in the shop. Textured finishes get extra layers of ink.

  2. 02

    Cure

    UV light hardens the ink the moment it lands, so it is bonded to the surface before it leaves the printer.

  3. 03

    Check

    Every piece is checked by eye for color, placement and smudges. If it is not right, it gets printed again.

  4. 04

    Pack

    Packed so nothing rattles and handed to the carrier within 3 business days. When your order ships, we email you its tracking number from orders@uvprints.us.

Questions before or after you order? Email orders@uvprints.us. The person who reads it is the one running the printer. Policies are on the Shipping & returns page.

Surfaces

What we print on

  • Phone Case

    Matte polycarbonate, raised UV ink

    Most iPhone 13–17, Galaxy S23–S26 and Pixel 8–10 models

  • Steel Bottle

    Double-wall stainless, 750 ml

    750 ml · insulated

  • Hardcover Notebook

    Hard cover, 192 dotted pages

    A5 · 148 × 210 mm

  • Die-cut Sticker (3-pack)

    Weatherproof vinyl, UV-printed, no laminate

    Three stickers, about 80 mm each

  • Coaster Set (4)

    Cork-backed acrylic

    4 × Ø 95 mm

  • Acrylic Keychain

    3 mm clear acrylic, double-sided

    35 × 55 mm

  • Acrylic Wall Print

    5 mm acrylic, stand-off mounts

    Panel 300 × 300 mm · print 250 × 250 mm

  • Deskmat XLComing soon

    Micro-weave cloth, stitched edge

    900 × 400 mm

  • Phone StandComing soon

    3D-printed in-house, UV-printed face plate

    Plate 84 × 150 mm · print 84 × 136 mm

  • Headphone StandComing soon

    3D-printed in-house: face plate, base and hanger

    Plate 90 × 240 mm · print 90 × 190 mm

  • Controller StandComing soon

    3D-printed in-house, UV-printed front plate

    Plate 150 × 74 mm · print 150 × 60 mm

Care

Keeping it sharp

  • Phone Case. Wipe with a damp cloth and dry it off. Skip alcohol wipes, solvents and scouring pads, which wear the print down.
  • Steel Bottle. Hand wash only, with warm soapy water and a soft sponge. No dishwasher and no soaking.
  • Hardcover Notebook. Wipe the cover with a dry or barely damp cloth. The pages are paper, so keep it out of the rain.
  • Die-cut Sticker (3-pack). Press onto a clean, dry, smooth surface from the center out. Wipe with a damp cloth; skip scrubbing and the dishwasher.
  • Coaster Set (4). Wipe with a damp cloth and let them dry. No dishwasher and no soaking: the cork backing does not like water.
  • Acrylic Keychain. Wipe with a damp cloth. Skip alcohol and solvents, which can cloud acrylic.
  • Acrylic Wall Print. Dust with a soft cloth, or wipe with a damp microfiber one. Skip glass cleaner, alcohol and paper towels, which cloud and scratch acrylic.

FAQ

Shipping, returns, artwork

How fast do orders ship?

Everything is printed to order and ships within 3 business days. If we cannot ship in that time, we email you first and you can wait or cancel for a full refund. US delivery usually takes 2 to 5 business days after that, and Canada 6 to 12. When your order ships, we email you its tracking number from orders@uvprints.us.

What does shipping cost?

Flat $5 per order. Free shipping from $50. We ship to the US and Canada.

Can I return a print?

Prints are made for you, so we can’t take them back for a change of mind. If your order arrives with a print defect, damaged in transit or as the wrong item, tell us within 30 days of delivery with a photo and we reprint it free, or refund it if you prefer. How to reach us is on the Shipping & returns page.

Which phones do the cases fit?

Most iPhone 13 to 17, Galaxy S23 to S26 and Pixel 8 to 10 models. You pick your exact model when you add a case to your cart (you can change it in the cart), and that list is every model we make. Need something else? Ask on the custom page.

Are these official game merch?

No. Every design is original art we drew ourselves. We reference game communities by name so you can find your people, but we don’t print logos, characters or other assets owned by Valve, Blizzard or Riot Games. We aren’t affiliated with them.

Can you print my own design?

Yes, if you own it or have permission. The custom page tells you what to email us. We’ll mock it up on the base you choose, send a proof, and print from one piece up.

Can it go in the dishwasher?

No, none of it. Hand wash the bottle with a soft sponge and don’t leave it soaking. Everything else just needs a damp cloth. The care section on this page covers each product.